Get a Free Quote in 30 Seconds
Three fields. We'll call you within 1 business day.
Prefer to talk? Call (406) 309-SEAL.
Boat & Watercraft Cleaning
Hull cleaning, barnacle removal, bottom paint stripping, and full marine surface restoration — without chemicals, water, or abrasive damage. We come to your marina, dry storage, or driveway. Get your boat launch-ready faster.
No Chemicals
Zero solvents or detergents — safe for bilge water regulations and marine environments.
No Water, No Mess
Dry ice sublimates on contact. Only dislodged contaminants remain — no secondary waste stream.
Safe on Fiberglass
Non-abrasive process won't gouge gelcoat, damage fiberglass, or affect aluminum or steel hulls.
Faster Than Sanding
Strip bottom paint and marine growth in a fraction of the time of traditional abrasive methods.
Marine Cleaning Services
Professional-grade dry ice blasting for every type of watercraft — faster, cleaner, and safer than traditional methods.
Hull Cleaning & Bottom Paint Removal
Strip barnacles, zebra mussels, marine growth, and old bottom paint without grinding, chemicals, or pressure washing. Dry ice blasting reaches every contour of the hull surface — fast, clean, and safe on fiberglass, aluminum, and steel.
Ask About ThisWhat's Included
Pre-Season & Post-Season Prep
Get your boat launch-ready or properly winterized with a thorough dry ice cleaning. We remove a full season of grime, salt residue, and growth — leaving the surface clean, dry, and ready for paint, inspection, or storage.
Ask About ThisWhat's Included
Deck, Interior & Bilge Restoration
Mold, mildew, algae, fish residue, fuel and oil stains — dry ice blasting removes them without harsh chemicals that leave residue or damage interior finishes. Decks, bilge compartments, livewells, and storage areas all cleaned thoroughly.
Ask About ThisWhat's Included
Pontoon & Specialty Watercraft
Pontoon tubes accumulate oxidation, algae, and mineral deposits that are difficult to remove without abrasive damage. Dry ice blasting restores the aluminum surface without scratching — also ideal for personal watercraft (PWC), kayaks with hardware, and ski boats.
Ask About ThisWhat's Included
The Right Way to Clean a Boat
We Come to You
Our team brings equipment directly to your location — no need to haul your boat to a shop. We service boats at:
- •Marinas and boat launches
- •Dry storage facilities
- •Private property and driveways
- •Boat yards and dealerships
Service area: Northwest Montana (primary), Northern Idaho, and Eastern Washington.
View Full Territory MapNot Sure What Your Boat Needs?
Send us a photo of the hull or surface condition. We'll tell you honestly whether dry ice blasting is the right solution and give you a rough estimate before you commit.
Send a Photo & Get an EstimateCommon Questions
Honest answers from people who actually do the work.
Is dry ice blasting safe on fiberglass hulls?
Yes — dry ice blasting is non-abrasive and widely used in marine restoration precisely because it won't damage fiberglass gelcoat. The pellets are softer than most surface materials and rely on thermal shock and kinetic energy to dislodge contaminants, not abrasion. We calibrate pressure to the surface type.
Can you remove old bottom paint without damaging the hull?
In most cases, yes. Dry ice blasting effectively strips old antifouling and bottom paint, leaving the hull surface clean and ready for new coats. Results vary by paint thickness and adhesion — we'll assess your hull before starting and tell you exactly what to expect.
How is this better than pressure washing or sanding?
Pressure washing uses water at high force — it can force moisture into core materials, damage gelcoat, and leave a cleanup mess. Sanding is time-intensive, creates dust, and requires masking and disposal. Dry ice blasting is faster, leaves no water or abrasive residue, and doesn't damage the underlying surface.
Do you travel to marinas or dry storage facilities?
Yes. We bring our equipment to you — marinas, boat storage yards, private property, or trailered at your home. Call us with your location and we'll confirm whether we can service your area.
What's the best time of year for hull cleaning?
Pre-launch (spring) and post-haul (fall) are the most popular windows. Pre-launch cleaning puts you on the water faster with a fresh bottom coat. Post-haul cleaning prevents marine growth from hardening during winter storage and makes spring prep easier.
Can you clean zebra mussels off my hull?
Yes. Zebra mussel removal is a specific application dry ice blasting handles very well. The thermal and kinetic action dislodges the mussels and byssal threads without leaving chemical residue — important for complying with aquatic invasive species regulations in Montana and Idaho.
Ready to Get Your Boat Launch-Ready?
Get a free, no-pressure estimate. We'll assess the hull and tell you exactly what it needs.